How To Finish A Root Ball Or Tree Stump For A Table Or Lamp Base

Often I am asked, after I find a stump or root ball, what are the procedures to finishing it out: Here they are:

Table Saw Tools

Finishing a Root Ball or Tree Stump

Table Saw Tools

After you have found your root ball or tree stump that you know would make a beautiful table or lamp, you will need to finish it. Here is the process I use:

Leveling the Piece: Cut the bottom in a plane perpendicular (at a right angle) to the length of the piece.

Set the piece on a level surface and using a level, draw a line around the piece at the height you want. Cut on this line.

I use a chainsaw for this, but a sharp hand saw will work also.

Sand both top and bottom surfaces to desired smoothness.

Stumps and root balls take time to dry-often years. If the bark is tight, the piece probably is not dry. Remove bark with a draw knife or chisel.

Physically remove rot and bugs. Smoke and heat will make the bugs jump ship. A bonfire works great. Place the piece close to the fire and heat it up. It will take time to heat up in the middle because wood is a good insulator. Wood doesn't burn until it reaches 500 degrees F. If you get the stump plus 200 degrees, it will kill any eggs, larvae, etc.

Use a good quality polyurethane to finish the piece. Be sure to coat ALL surfaces: top, bottom, etc.

At least 3 coats are required to seal the piece. The polyurethane will harden the surface and stabilize minor rot. Rotted areas really drink the polyurethane-use it liberally in soft areas. Sand lightly with very fine sand paper between coats. Let dry completely, and it is completed.
Enjoy your work of art!!!

Gene Nellis

Unique Custom Furniture from the Big Sky Country of Montana

http://www.yellowstonefurniture.com

How To Finish A Root Ball Or Tree Stump For A Table Or Lamp Base
Table Saw Tools

17 Inch Monitors Angle Grinder

Woodworking Patterns

Have you ever decided to build something at home and ended up completely lost. Your project didn't turn out quite like you had imagined it would. Or you cut something wrong and it ended up too short so you had to go back to the hardware and buy another piece. Maybe you were almost finished and found you had missed a piece out earlier and now it was hard to make it fit. So you decided to buy one of the pre-cut and un-assembled kits but were shocked at the price. You desperately want to build something but it never seems to work out. You have even bought plans in the past but found that they were too hard to follow or they missed something out or were just plain misleading so you ended up in all sorts of mess.

Table Saw Tools

We have all been there and done that but things have changed for the better. The new breed of woodworking patterns are on the market and are a vast improvement on what was available in the past. The manufacturers of these new patterns have taken note of all our complaints and finally put together plans that are real easy to follow. With the new range of plans and patterns you will have no trouble building the woodworking project of your dreams. The new patterns and plans are set out in easy to follow step by step instructions. You just have to focus on the first step until you have it done and then you can get to the next step.

Table Saw Tools

The big problem most of us have when we are building something is we have to be able to see the complete picture so that as we put it together that big picture is coming to life. Unfortunately, unless we are a skilled craftsman that is difficult to do and most of us get well and truly lost along the way with some projects ending up in an untidy pile in the corner or striped down for bits for the next futile attempt. This is no longer a problem because we have these step by step blue prints. No more do we have to try and hold the whole picture in our mind as we try and bring it all together. Just follow the steps one by one. They are all set out and easy to follow and some even have video guides included for you.

So try out these new breed of woodworking patterns now and finally create your first successful woodworking project.

Woodworking Patterns
Table Saw Tools

Onkyo Theater System Soldering Iron Weller

Royal Entrepreneurship - The Case of Royal Bank Zimbabwe Ltd Formation

The deregulation of the financial services in the late 1990s resulted in an explosion of entrepreneurial activity leading to the formation of banking institutions. This chapter presents a case study of Royal Bank Zimbabwe, tracing its origins, establishment, and the challenges that the founders faced on the journey. The Bank was established in 2002 but compulsorily amalgamated into another financial institution at the behest of the Reserve Bank of Zimbabwe in January 2005.

Table Saw Tools

Entrepreneurial Origins
Any entrepreneurial venture originates in the mind of the entrepreneur. As Stephen Covey states in The 7 Habits of Highly Effective People, all things are created twice. Royal Bank was created first in the mind of Jeffrey Mzwimbi, the founder, and was thus shaped by his experiences and philosophy.

Table Saw Tools

Jeff Mzwimbi grew up in the high density suburb of Highfield, Harare. On completion of his Advanced Level he secured a place at the University of Botswana. However he decided against the academic route at that time since his family faced financial challenges in terms of his tuition. He therefore opted to join the work force. In 1977 he was offered a job in Barclays Bank as one of the first blacks to penetrate that industry. At that time the banking industry, which had been the preserve of whites, was opening up to blacks. Barclays had a new General Manager, John Mudd, who had been involved in the Africanisation of Barclays Bank Nigeria. On his secondment to Zimbabwe he embarked on the inclusion of blacks into the bank. Mzwimbi's first placement with Barclays was in the small farming town of Chegutu.

In 1981, a year after Independence, Jeff moved to Syfrets Merchant Bank. Mzwimbi, together with Simba Durajadi and Rindai Jaravaza, were the first black bankers to break into merchant banking department. He rose through the ranks until he was transferred to the head office of Zimbank - the principal shareholder of Syfrets - where he headed the international division until 1989.

The United Nations co-opted him as an advisor to the Reserve Bank in Burundi and thereafter, having been pleased by his performance, appointed him a consultant in 1990. In this capacity he advised on the launch of the PTA Bank travellers' cheques. After the consultancy project the bank appointed him to head the implementation of the programme. He once again excelled and rose to become the Director of Trade Finance with a mandate of advising the bank on ways to improve trade among member states. The member states were considering issues of a common currency and common market in line with the European model. Because the IFC and World Bank had unsuccessfully sunk gigantic sums of funds into development in the region, they were advocating a move from development finance to trade finance. Consequently PTA Bank, though predominantly a development bank, created a trade finance department. To craft a strategy for trade finance at a regional level, Mzwimbi and his team visited Panama where the Central Americans had created a trade finance institution. They studied its models and used it as a basis to craft the PTA's own strategy.

Mzwimbi returned to Zimbabwe at the conclusion of his contract. He weighed his options. He could rejoin Barclays Bank, but recent developments presented another option. At that time Nick Vingirai had just returned home after successfully launching a discount house in Ghana. Vingirai, inspired by his Ghanaian experience, established Intermarket Discount House as the first indigenous financial institution. A few years later NMB was set up with William Nyemba, Francis Zimuto and James Mushore being on the ground while one of the major forces behind the bank, Julias Makoni, was still outside the country. Makoni had just moved from IFC to Bankers' Trust, to facilitate his ownership of a financial institution. Inspired by fellow bankers, a dream took shape in Mzwimbi's mind. Why become an employee when he could become a bank owner? After all by this time he had valuable international experience.

The above experience shows how the entrepreneurial dream can originate from viewing the successes of others like you. The valuable experiences acquired by Mzwimbi would be critical on the entrepreneurial journey. An entrepreneurial idea builds on the experiences of the entrepreneur.
First Attempts

In 1990 Jeff Mzwimbi was approached by Nick Vingirai, who was then Chairman of the newly resuscitated CBZ, for the CEO position. Mzwimbi turned down the offer since he still had some contractual obligations. The post was later offered to Gideon Gono, the current RBZ governor.

Around 1994, Julias Makoni (then with IFC), who was a close friend of Roger Boka, encouraged Boka to start a merchant bank. At this time Makoni was working at setting up his own NMB. It is possible that, by encouraging Boka to start, he was trying to test the waters. Then Mzwimbi was seeing out the last of his contract at PTA. Boka approached him at the recommendation of Julias Makoni and asked him to help set up United Merchant Bank (UMB). On careful consideration, the banker in Mzwimbi accepted the offer. He reasoned that it would be an interesting option and at the same time he did not want to turn down another opportunity. He worked on the project with a view to its licensing but quit three months down the line. Some of the methods used by the promoter of UMB were deemed less than ethical for the banking executive, which led to disagreement. He left and accepted an offer from Econet to help restructure its debt portfolio.

While still at Econet, he teamed up with the late minister Dr Swithun Mombeshora and others with the intent of setting up a commercial bank. The only commercial banks in the country at that point were Standard Chartered, Barclays Bank, Zimbank, Stanbic and an ailing CBZ. The project was audited by KPMG and had gained the interest of institutional investors like Zimnat and Mining Industry Pension Fund. However, the Registrar of Banks in the Ministry of Finance, made impossible demands. The timing of their application for a licence was unfortunate because it coincided with a saga at Prime Bank in which some politicians had been involved, leading to accusations of influence peddling. Mombeshora, after unsuccessfully trying to influence the Registrar, asked that they slow down on the project as he felt that he might be construed as putting unnecessary political pressure on her. Mzwimbi argues that the impossible stance of the Registrar was the reason for backing off that project.

However other sources indicate that when the project was about to be licensed, the late minister
demanded that his shareholding be increased to a point where he would be the majority shareholder. It is alleged that he contended this was due to his ability to leverage his political muscle for the issuance of the licence.

Entrepreneurs do not give up at the first sign of resistance but they view obstacles in starting up as learning experiences. Entrepreneurs develop a "don't quit" mind-set. These experiences increase their self -efficacy. Perseverance is critical, as failure can occur at any time.

Econet Wireless
The aspiring banker was approached, in 1994 by a budding telecommunication entrepreneur, Strive Masiyiwa of Econet Wireless, to advise on financial matters and help restructure the company's debt. At that time Mzwimbi thought that he would be with Econet probably for only four months and then return to his banking passion. While at Econet it became apparent that, once licensed, the major drawback for the telecommunication company's growth would be the cost of cell phone handsets. This presented an opportunity for the banker, as he saw a strategic option of setting up a leasing finance division within Econet that would lease out handsets to subscribers. The anticipated four months to licensing of Econet dragged into four years, which encompassed a bruising legal struggle that finally enabled the licensing against the State's will. Mzwimbi's experience with merchant banking proved useful for his role in Econet's formation. With the explosive growth of Econet after an IPO, Mzwimbi assisted in the launch of the Botswana operations in 1999. After that, Econet pursued the Morocco licence. At this stage, the dream of owning a bank proved stronger than the appeal of telecoms. The banker faced some tough decisions, as financially he was well covered in Econet with an assured executive position that would expand with the expansion of the network. However the dream prevailed and he resigned from Econet and headed back home from RSA, where he was then domiciled.

His Econet days bestowed on him a substantial shareholding in the company, expanded his worldview and taught him vital lessons in creating an entrepreneurial venture. The persistence of Masiyiwa against severe government resistance taught Mzwimbi critical lessons in pursuing his dream in spite of obstacles. No doubt he learnt a lot from the enterprising founder of Econet.

Debut Royal Bank
On his return in March 2000, Mzwimbi regrouped with some of his friends, Chakanyuka Karase and Simba Durajadi, with whom he had worked on the last attempt at launching a bank. In 1998 the Banking Act was updated and a new statutory instrument called the Banking Regulations had been enacted in the light of the UMB and Prime Bank failures.

These required that one should have the shareholders, the premises and equipment all in place before licensing. Previously one needed only to set up an office and hire a secretary to acquire a banking license. The licence would be the basis for approaching potential investors. In other words it was now required that one should incur the risk of setting up and purchasing the IT infrastructure, hire personnel and lease premises without any assurance that one would acquire the licence. Consequently it was virtually impossible to invite outside investors into the project at this stage.

Without recourse to outside shareholders injecting funds, and with minimal financial capacity on the part of his partners, Mzwimbi fortuitously benefited from his substantial Econet shares. He used them as collateral to access funds from Intermarket Discount House to finance the start up - acquired equipment like ATMs, hired staff, and leased premises. Mzwimbi recalls pleading with the Central Bank and the Registrar of Banks about the oddity of having to apply for a licence only when he had spent significant amounts on capital expenditure - but the Registrar was adamant.

Finally, Royal Bank was licensed in March 2002 and, after the prerequisite pre-opening inspections by the Central Bank, opened its doors to the public four months later.

Entrepreneurial Challenges
The challenges of financing the new venture and the earlier disappointments did not deter Mzwimbi. The risk of using his own resources, whereas in other places one would fund a significant venture using institutional shareholders' capital, has already been discussed. This section discusses other challenges that the entrepreneurial banker had to overcome.

Regulatory Challenges and Capital Structure
The new banking regulations placed shareholding restrictions on banks as follows:

*Individuals could hold a maximum of 25% of a financial institution's equity
*Non-financial institutions could hold a maximum of 10% only
*A financial institution however could hold up to a maximum of 100%.

This posed a problem for the Royal Bank sponsors because they had envisaged Royal Financial Holdings (a non-financial corporate) as the major shareholder for the bank. Under the new regulations this could hold only 10% maximum. The sponsors argued with the Registrar of Banks about these regulations to no avail. If they needed to hold the shares as corporate bodies it meant that they needed at least ten companies, each holding 10% each. The argument for having financial institutions holding up to 100% was shocking as it meant that an asset manager with a required capitalisation of million would be allowed by the new law to hold 100% shareholding in a bank which had a 0 million capitalisation yet a non-banking institution, which may have had a higher capitalisation, could not control more than 10%. Mzwimbi and team were advised by the Registrar of Banks to invest in their personal capacities. At this point the Reserve Bank (RBZ) was simply involved in the registration process on an advisory basis with the main responsibility resting with the Registrar of Banks. Although the RBZ agreed with Mzwimbi's team on the need to have corporations as major shareholders due to the long term existence of a corporation as compared to individuals, the Registrar insisted on her terms. Finally, Royal Bank promoters chose the path of satisficing- and hence opted to invest as individuals, resulting in the following shareholding structure:

*Jeff Mzwimbi - 25%
*Victor Chando - 25%
*Simba Durajadi- 20%
*Hardwork Pemhiwa- 20%
*Intermarket Unit Trust - 2% (the only institutional investor)
*Other individuals - less than 2% each.
The challenge to acquire institutional investors was due to the restrictions cited above and the requirement to pump money into the project before the licence was issued. They negotiated with TA Holdings, which was prepared to take equity holding in Royal Bank.

So tentatively the sponsors had allocated 25% equity for Zimnat, a subsidiary to TA Holdings. Close to the registration date, the Zimnat negotiators were changed. The incoming negotiators changed the terms and conditions for their investment as follows:

*They wanted at least a 35% stake
*The Board chairmanship and chairmanship of key committees - in perpetuity.

The promoters read this to mean their project was being usurped and so turned TA Holdings down. However, in retrospect Mzwimbi feels that the decision to release the TA investment was emotional and believes that they should have compromised and found a way to accommodate them as institutional investors. This could have strengthened the capital base of Royal Bank.

Credibility Challenges
The main sponsors and senior managers of the bank were well known players in the industry. This reduced the credibility gap. However some corporate customers were concerned about the shareholding of the bank being entirely in the hands of individuals. They preferred the bank risk to be reduced by having institutional investors. The new licensing process adversely affected access to institutional investors. Consequently the bank had institutional shareholders in mind for the long term. They claim that even the then head of supervision and licensing at RBZ, agreed with the promoters' concern about the need for institutional investors but the Registrar of Banks overruled her.

Challenges of Explosive Growth
The strategic plan of Royal Bank was to open ten branch offices within five years. They planned to open three branches in Harare in the first year, followed by branches in Bulawayo, Masvingo, Mutare and Gweru within the next year. This would have been followed by an increase in the number of Harare branches.

From their analysis they believed that there was room for at least four more commercial banks in Zimbabwe. A competitor analysis of the industry indicated that the government controlled Zimbank was the major competitor, CBZ was struggling and Stanbic was not likely to grow rapidly. The bigger banks, Barclays and Standard Chartered, were likely to scale down operations. The promoters of the bank project had observed in their extensive international experie nce that whenever the economy was indigenised in Africa, these multinational banks would dispose of their rural branches. They were therefore positioning themselves to exploit this scenario once it presented itself.

The anticipated opportunity presented itself earlier than expected. On an international flight with the Standard Chartered Bank CEO, Mzwimbi, confirmed his interest in a stake of the bank's disinvestments which was making rounds on the rumour mill. Although surprised, the multinational banker agreed to give the two month old entrepreneurial bank the right of first refusal on the fifteen branches that were being disposed of.

The deal was negotiated on a lock, stock and barrel basis. When the announcement of the deal was made internally, some employees resisted and politicised the issue. The Standard Chartered CEO then offered to proceed on a phased basis with the first seven banks going through, followed by the others later. Due to Mzwimbi's savvy negotiating skills and the determination by Standard Chartered to dispose of the branches, the deal was successfully concluded, resulting in Royal Bank growing from one branch to seven outlets within the first year of operation. It had exceeded their projected growth plan.

Due to what Mzwimbi calls divine favour, the deal included the real estate belonging to the bank. Interestingly, Standard Chartered had failed to get bank buildings on lease and so in all small towns they had built their own buildings. These were thus transferred within the deal to Royal Bank. Inherent in the deal was an inbuilt equity from the properties since the purchase price of 0 million was heavily discounted.

Shortly after that, Alex Jongwe, the CEO of Barclays Bank, approached Royal Bank to offer a similar deal to the Standard Chartered acquisition of rural branches. Barclays offered eight branches, of which Royal initially accepted six. Chegutu and Chipinge were excluded, since Royal already had a presence there.

However after failing to dispose of those two branches, Barclays came back and asked Royal "to take them for a song". Mzwimbi accepted these for two strategic reasons, namely the acquisitions gave him physical assets (the buildings) that he could lease out to anyone who decided to expand into those areas and secondly, that created a monopoly in those towns. With time, the fortuitous inclusion of real estate into the deal increased the wealth of Royal Bank as the prices of properties skyrocketed with hyperinflation.

One of the major key drivers of the Zimbabwean economy is agriculture. After the failed Land Donors Conference in 1998 and the subsequent land reform programme, it was evident to the established banks that commercial farming would be significantly affected.

They sought to quit the small towns since their major clients were commercial farmers. Strategically to acquire these branches when the major source of their revenue was under threat would have required that Royal Bank should have put in place an alternative source of revenue from farming. It is not clear whether this had been considered during these acquisitions.

The acquisition increased Royal's branch network to 20 and the staff complement by 50. Incidentally, the growth created problems of managing the system as well as cultural issues. The highly unionised Standard Chartered employees were antagonistic to management as compared to the trusting Royal culture. This acquisition resulted in potential culture challenges. Management controlled this by introducing Norton and Kaplan's Balanced Scorecard system in an effort to manage the cultural clashes of the three systems.

The Challenge of Financing Acquisition
A major challenge in acquisitions is the financing structure. During licensing the Registrar of Banks refused to accept the nearly 0 million that had been spent by the promoters of Royal Bank as capital. She insisted that this be recognised as pre-operating expenses and therefore wanted to see fresh capital amounting to 0 million. The change of rules posed a challenge for Mzwimbi's team. However, being an astute deal maker he strategically conceptualised an arrangement whereby the 0 million worth of equipment purchased be accounted for as belonging to Royal Financial Holdings and made available to Royal Bank on a lease basis. This would then be sold to the bank as it grew. The RBZ was appraised of this decision and accepted it, and even noted in the inspection report the amount of expenditure spent pre-operatively by the promoters. The remainder of the pre-operative expenses were converted into nonvoting non-convertible preference shares of Royal Bank.

In January 2003 commercial bank capitalisation was increased to 0 million by the regulator and hence there was a need for recapitalisation. This coincided with the branch acquisition deals. At this stage the Royal Bank team decided to partially fund the acquisition through a conversion of the preference shares into ordinary shares and partially from fresh capital injected by the shareholders. Since the bank was now performing well, it purchased the capital equipment, owned by Royal Financial Holdings, which it had been leasing. This deal included the redistribution and balancing of shareholdings in Royal Bank to conform to the statutory requirements. Retrospectively it may be viewed as a strategic blunder to have moved the equipment into the bank ownership. Considering the "sale" of Royal Bank assets to ZABG, if these and the real estate had been warehoused into RFH the take-over may have been difficult. This highlights the failure sometimes by entrepreneurs to appreciate the importance of asset protection mechanisms while still small.

However the RBZ accused the shareholders of using depositors' funds for the recapitalisation of the bank. Partly this is due to a misunderstanding that RFH is the holding company of Royal Bank and so sometimes accounts flowing from Royal Financial Holdings were accounted by RBZ investigators as Royal Bank funds. These allegations formed part of the allegations of fraud against Mzwimbi and Durajadi when they were arrested in September 2004. Subsequently the courts cleared them of any fraudulent activities in January 2007.

Managerial Challenges
Retrospectively, Mzwimbi views his managerial team as being excellent apart from some "weaknesses in the finance department". He assembled a solid team from various banking backgrounds. The most significant ones became founding shareholders like Durajadi Simba at treasury, the late Sibanda in charge of the lending department. Faith Ngwabi-Bhebhe, then with Kingdom, helped lay a solid foundation of human resource systems for the bank.

However, they had a challenge finding a financial director. The new statutory instrument required that CVs of all corporate officers be made available for vetting when the licence was applied for. Without a licence one could not promise someone in current employment a job and submit his CV as this would reflect badly on the promoters. Eventually they hired a chartered accountant without banking experience. Initially they thought this was a stop-gap measure.

With the unanticipated growth, they forgot to revisit this department to strengthen it. Because of these weaknesses the bank continued to face challenges in the treasury department, despite the gallant efforts of the financial director. Strangely, when other executive directors were arrested the FD was left untouched and yet all the issues at stake arose from treasury activities. It would appear in retrospect that the FD was intimidated into providing incriminating evidence for the others. She too was threatened with arrest.

Successful entrepreneurial ventures in a growth phase need both strong leaders and strong managers. It's not enough to have strong leadership skills. As Ed Cole said, "It's easier to obtain than to maintain." The role of strong managers is to create the capacity to maintain what strong entrepreneurial leaders acquire. Interestingly a new field of research, Strategic Entrepreneurship now recognises the need for both entrepreneurial and strategic management competences for successful ventures.

Strategic Growth Plans
Royal Bank's strategic intent was to create a full house of financial services. The plan included a commercial bank, a discount house, an insurance company, a building society and an asset management service. However the vision was later refined and the plans for a discount house were dropped, since a strong commercial bank with a powerful dealing room would serve the same purpose. A strong asset manager would also relieve the need for a discount house.

With the significant branch network, the commercial bank was solid but needed a presence in a few major centres e.g. Masvingo and Gweru. In Gweru they could not locate suitable premises.

In Masvingo, after a struggle they were offered premises which had previously been earmarked for Trust Bank. With Trust Bank facing challenges, it abandoned Masvingo. However, Royal was placed under a curator when it was about to move in.

Royal Bank courted Finsreal Asset Managers for a potential acquisition since there were synergies and shared beliefs. It had a solid corporate customer base and very good growth prospects since an astute entrepreneur led it. Unfortunately the deal was aborted at the last minute when the owner opted out. After the Finsreal flop, Mzwimbi and his team pursued the asset manager through organic growth. They developed their own company -Regal Asset Managers - during the last quarter of 2003. At this stage the capital requirements and licensing process of asset managers was fairly easy. Asset managers were quite profitable, with minimal regulatory controls. Regal Asset Managers completed two good deals, namely: a management buyout of Screen Litho, a printing concern, and a big deal for First Mutual at its demutualisation.

The Screen Litho deal had been offered to venture capitalists but their demands were excessive. That is when Regal Asset Managers was set up and concluded a funding deal through Royal Financial Holdings (RFH), resulting in RFH holding 99% of Screen Litho which was to be off- loaded once management was in a solid financial position. Screen Litho is performing very well and hence this investment has proven successful. The entrepreneurial Mzwimbi thus diversified his financial portfolio through this deal.

For the building society, Royal eyed First National Building Society (FNBS) and almost signed a memorandum of agreement. Royal Bank was almost ready to transfer its staff mortgage facility to FNBS, when a close friend with a powerful position in the Society discouraged it from committing to the deal without divulging the reasons. A short while later FNBS was placed under a curator, with the RBZ citing cases of fraud by the top executives. The increasingly acquisitive Royal Bank entrepreneurs shifted and trained their guns at Beverly Building Society. Intermarket had already failed to consummate a deal with Beverley. Royal Bank was now competing with African Banking Corporation (ABC), which beat it to an agreement but was denied shareholder authority to complete the deal. Royal Bank then went back to wooing Shingai Mutasa of TA Holdings in an effort to increase its institutional shareholder base. He was keen on the deal.

Mutasa was acquainted with the two British owners of Beverley and one of his board members sat on the Beverley Building Society board. His support would have been crucial in the deal. However this process was overtaken by events, as the incoming RBZ governor superintended a monetary policy which led the financial sector into a tailspin.

Some young entrepreneurs approached Royal Bank seeking for support to establish an insurance company. Since this was in line with Royal's strategic plan it consented and helped start Regal Insurance Company. Royal Bank originated the name Regal Insurance.

Once the licence was acquired there were some shareholder disputes and Royal Bank distanced itself from the deal. The young entrepreneurs who had been supported by Royal Bank lost the company to the other shareholders.

The final thrust in the strategic plan was establishing a stock broking firm. An idiosyncrasy with stock broking licences is that they are not issued to an institution but to a person. Intermarket had the highest number of stock broking licences. Mzwimbi approached the Intermarket stock broking CEO, who was a friend, about the prospects of acquiring one of the stockbrokers and he did not seem to have a problem with that. At the same time Victor Chando, a major shareholder in Royal Bank, brought to the table his interest in acquiring Barnfords Securities. He was encouraged to pursue the deal with the help of Royal Bank with the plan of bringing it in-house as soon as possible. All Royal Bank deals would now be channelled through Barnfords.

It appears that Royal bank developed a strong appetite for deals. One wonders what it would have been like if it had taken time to develop strong systems and capacity before attempting so many deals. What could have been avoided if the appetite for deals had been controlled? Entrepreneurs may need to exercise restrain in their expansion in order to create capacities to absorb and consolidate the growth.

Royal Entrepreneurship - The Case of Royal Bank Zimbabwe Ltd Formation
Table Saw Tools

Christmas Sales DEWALT DW744XRS 10-inch Job Site Table Saw with Rolling Stand 201

Jan 15, 2012 05:57:53

Christmas DEWALT DW744XRS 10-inch Job Site Table Saw with Rolling Stand Deals
Click for larger image and other views

DEWALT DW744XRS 10-inch Job Site Table Saw with Rolling Stand

>> Click here to update Christmas prices for DEWALT DW744XRS 10-inch Job Site Table Saw with Rolling Stand <<

Christmas Sales DEWALT DW744XRS 10-inch Job Site Table Saw with Rolling Stand Feature

  • Site-Pro modular guarding system allows for tool-free adjustments of guarding components for each application
  • Exclusive telescoping fence delivers 24-1/2-inch rip capacity without sacrificing portability
  • Rack and pinion fence rails make fence adjustments fast, smooth, and accurate
  • Features a 15-amp high-torque motor with the power to cut pressure-treated lumber and hardwoods
  • Telescoping fence rails retract to create a small, portable package
  • On-board storage provides easy access to the Site-Pro guarding components


Christmas Sales DEWALT DW744XRS 10-inch Job Site Table Saw with Rolling Stand Overview

The DEWALT versatile 10-Inch Jobsite Table Saw with Rolling Stand pairs a portable design with a powerful 15 amp motor and a max rip capacity of 24-1/2 inches. Offering application-specific setups with the Site-Pro Modular Guarding System, this saw comes with a miter gauge, a push stick, and a 10-inch, 24-tooth carbide blades, and compact rolling stand for easy transport.

callout box top
10-Inch Jobsite Table Saw
with Rolling Stand
At a Glance:
  • Powerful 15 amp, high-torque motor delivers no-load speed of 3,650 rpm

  • Quick, tool-free adjustments with Site-Pro Modular Guarding System

  • Telescoping fence rails and rolling table saw stand for easy transport

  • Dust-collection port for fast clean up

  • Three-year limited warranty, one-year free service, and 90-day money-back guarantee
callout box bottom
DEWALT 10-Inch Job Site Table Saw

Saw is compact and portable at just 58 pounds and features a rolling stand for easy transportation. View larger.

DEWALT 10-Inch Job Site Table Saw

24-tooth carbide blade has max rip capacity of 24-1/2 inches. View larger.
Consistent, Powerful Performance
Thanks to a 15 amp, high-torque motor, this DEWALT table saw delivers the power you need for tough jobs like cutting hardwood and pressure-treated lumber. The saw's 10-inch blade spins at a no-load speed of 3,650 rpm for quick, clean cuts. Built-in electronic feedback helps the saw maintain consistent blade speeds, so cut quality remains consistently high--even when you're tackling the toughest applications.

To ensure accuracy and user comfort, this saw features a heavy-duty internal motor mechanism that stabilizes the arbor and keeps vibration to a minimum. In addition, the saw's soft-start feature allows for extended gear and motor life by reducing start-up torque.

Convenient Site-Pro Modular Guarding System
The DEWALT versatile Site-Pro Modular Guarding System makes it easy to set up for a variety of applications by allowing tool-free adjustment of application-specific guarding components.

The saw's exclusive fence configuration enables a huge 24-1/2-inch rip capacity. Rack and pinion fence rails make fence adjustments fast, smooth, and accurate. The fence's telescoping design allows the rails to move out to 24 inches to rip full sheets of materials or be retracted for a compact design that's easy to transport.

In addition to offering large rip capacity, this saw can cut dados up to 13/16-inch wide. It features a maximum cut depth of 3-1/8 inches at 90 degrees and 2-1/4 inches at 45 degrees. And a big 26-1/2 by 19-1/4-inch table surface provides the support you need when working with large applications.

For added convenience, on-board storage provides easy access to the Site-Pro Guarding components and the push stick when they're not in use. A handy 2-inch dust collection port allows you to connect the saw to a Shop-Vac for efficient dust extraction and a cleaner work area.

Portable Design and Unique Rolling Stand
This DEWALT table saw weighs just 58 pounds which, makes for easy setup and tear down. You can move it from your workshop to the worksite with ease.

This DEWALT features a rolling stand that makes transporting the saw around the worksite easy. This stand pairs heavy-duty aluminum construction with innovative details, like folding legs and convenient heavy-duty wheels. When upright, the stand puts your saw table top at an ideal 30-inches off the floor to keep your work at an ideal height and under control for accurate cuts. Plus, at just 33 pounds, this saw is built to roll right up stairs and over jobsite debris.

This 10-inch jobsite table saw with rolling stand also comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box
DW744XRS DEWALT 10-Inch Job Site Table Saw, DW7440RS Rolling Table Saw Stand, 10-inch 24-tooth carbide blade miter gauge, and push stick.


DEWALT 10-Inch Job Site Table Saw
This DEWALT table saw has a heavy-duty, 15 amp
motor that delivers a no-load speed of 3,650 rpm.





SAVE NOW on Christmas Sales Offers below!

Available In Stock.

This Christmas DEWALT DW744XRS 10-inch Job Site Table Saw with Rolling Stand is cheap and shipping as well.

Price : Click to Check Update Prices Please.

DEWALT DW744XRS 10-inch Job Site Table Saw with Rolling Stand

Limited Offer Today!! DEWALT DW744XRS 10-inch Job Site Table Saw with Rolling Stand Christmas and Cyber Monday 2011 Deals

Home Theater Subwoofer Protien Whey

Dremel 231 Shaper/Router Table

Christmas Sales Dremel 231 Shaper/Router Table 201

Jan 14, 2012 06:24:31

Christmas Dremel 231 Shaper/Router Table Deals
Click for larger image and other views

Dremel 231 Shaper/Router Table

>> Click here to update Christmas prices for Dremel 231 Shaper/Router Table <<

Christmas Sales Dremel 231 Shaper/Router Table Feature

  • Convert your DREMEL corded rotary tool into a bench mounted wood shaper
  • Features an adjustable fence and a large 8- by 6-inch work table
  • Slot, groove, sand and trim edges
  • MultiPro tool not included
  • For use with rotary tool models 275, 285, 395 and 398


Christmas Sales Dremel 231 Shaper/Router Table Overview

We will admit that we think these rotary tools are some of the coolest things around; you can do so many things with them. But once we saw this attachment, we were blown away. If you don't have the money or the space (or the inclination) to set up a whole router table assembly in your home or shop, but you still want to put decorative edges on wood projects, this is absolutely the ticket. It holds the tool under the table, and you mount your shaping bit in it. Turn it on, run your piece against the stationary tool, and your edge is routed. It also works great for small dado grooves with a straight bit. The new table surface is even smoother than before, and it's plenty big enough for small craft projects. It's also a great setup for sanding: Just chuck in a sanding drum and move your workpiece against it. If you've got a rotary tool, get this.

Christmas Sales Dremel 231 Shaper/Router Table Specifications

Gain the flexibility and precision you need to shape, detail, and sand a variety of soft and hard woods with the Dremel 231 Shaper/Router Table. Ideal for those who use their Dremel corded rotary tool to help complete crafts, hobbies, and light-duty renovation projects, the 231 features an adjustable fence to tackle everything from making notches and grooves in a wooden frame to constructing an architectural model. For added convenience, it fits Dremel rotary tool models 400, 398, 395, 300, 285, 275, 200, and 100 (tool not included).


The 231 holds your rotary tool in place under the table for easy slotting, trimming, grooving, and sanding. View larger.
Slot, Groove, Sand, and Trim
The 231 Shaper/Router table extends and enhances the versatility of your Dremel rotary tool, so it can help you take on any project you dream up. Building furniture for a dollhouse? Restoring vintage wooden frames? Engraving letters or designs in soft wood? The 231 lets you tackle this kind of detailed work with ease. It's also excellent for architectural models and scale model making because it's designed to keep pieces and materials organized as you work. Additionally, the 231 gives you the flexibility to handle every step of the construction process in one place, minimizing clutter and lost parts.

Smooth Tabletop Surface for a Variety of Jobs
The 231 has a smooth tabletop surface for easy slotting, edge trimming, grooving, and sanding of both common and less traditional shapes, making it a great choice for model making, decorative trim work, or detailed edging projects. And because it gives you a dedicated and steady place to work, this table is also a must-have for anyone who uses their Dremel rotary tool for routing applications.

Straightforward Operation
Operation is simple: the 231 holds your rotary tool securely in place under the table so you can mount whichever shaping bit you're using directly in it. Routing is fast and easy, even for small dado grooves with a straight bit. Sanding is equally effortless -- simply put in a sanding drum and position your materials directly against it. Convenient plastic knobs lend durability and ensure a comfortable grip, and a screwdriver slot makes for efficient tool assembly and depth adjustment, so you're able to complete your project in one place. For added peace of mind, the adjustable fence ensures proper wood placement as it passes through the bit.

Compact, Portable, and Easy to Store
Measuring 8 x 6 inches, the worktable gives you ample space and yet is compact enough to fit in a small or over-crowded workspace or shop. Its small size allows it to be stored in a corner or cabinet, and it's compact enough for easy portability. Finally, the 231 is much more affordable than a complete router table, making it an economical choice.

What's in the Box
Shaper/router table and instruction sheet



The smooth table and adjustable fence help ensure accuracy and ease of use. View larger.



SAVE NOW on Christmas Sales Offers below!

Available In Stock.

This Christmas Dremel 231 Shaper/Router Table is cheap and shipping as well.

Price : Click to Check Update Prices Please.

Dremel 231 Shaper/Router Table

Limited Offer Today!! Dremel 231 Shaper/Router Table Christmas and Cyber Monday 2011 Deals

Sun Visor Lcd 32 Led Lcd Hdtv

How To Build A Patio Cover

If willing to experiment and build a Patio Cover, hammer out questions as to why you need a Patio Cover, for what purpose, whether it would be painted or made with wood, prefabricated aluminum or PVC, and if permission is required from state or city authorities. Remember that a patio is an extension of the house, generally not more than 12 feet and single-storied. The patio can be fully covered or have no cover. No special skills are required for building a Patio Cover except co-coordinating your patience, dimension of area, number of wood or aluminum panels and material required.

Table Saw Tools

Begin with the necessary spade work according to weather conditions, area and usage of patio. The next step is selecting material from a comprehensive range, including polycarb panels for high summer or winter temperatures, vinyl opaque all weather conditions, vinyl translucent and clear panels suitable for use in milder weather conditions, aluminum pan roof that is cool, durable and requiring little maintenance, or insulated foam panels providing insulation for a strong low-maintenance roof. The panels should fit and install easily, and offer design flexibility. Check if the gutter system is accessible for cleaning whether it is w-pan gutter, roll form gutter or extruded gutter and valance.

Table Saw Tools

For that professional Patio Cover you would need appropriate tools; you can order a complete tool kit or purchase one. The tools required would be a 3/8"" drill bit, hack saw or electric jig saw with fine-toothed blade for metal, a caulking gun, measuring tape, screwdriver, hammer, metal snips, socket and shank, crescent wrench, level, carpenter's square, ladders, heavy duty pencils, masonry and nuts and bolts. If the patio is attached to the house then the existing support system will help cover to fit easily. For a free-standing patio the cover will have to be fitted on all four sides, depending on shape. The building instructions will guide you step by step.

How To Build A Patio Cover
Table Saw Tools

Network Media Player With Wifi

A History of Victorian Furniture

During the course of the1800's Britain developed into the most prosperous and technologically advanced nation on earth. Invention, mechanization and industrialization brought the greatest and far reaching change in England and the English. The nation rapidly grew in confidence of its place as a leading world power. Fueled by the wealth of its industrialization and new manufacturing industries its influence reached far around the world to the furthest corners of its empire. This was a new world and with it came a new order to challenge the old accepted power structures. A new class middle class of wealthy industrialists whose money gave them power and influence became the Victorian rich and their choices and values were to be a major influence in Victorian life. Their money, founded in the production from the new factories bought them fine new homes, large and important. These great new houses borrowed from the styles of the upper classes with many rooms which needed filling. The rise of the middle classes meant more homes with more money to spend and the need for more furniture.

Table Saw Tools

Along with the new modern Victorian world came an inevitable change in style of the Victorian home and the history of Victorian furniture is one of variety. Furniture styles that reflected a fascination with the past were also a showcase of what was now possible in design and production. This age saw the beginning of mass production of furniture in a manufacturing industry whose new industrial techniques could rapidly reproduce the styles and designs which before now has been expensively carved by craftsmen.

Table Saw Tools

The history of Victorian furniture is one of variety. Out of favour went the grace and fine lines of the Regency style furniture which were replaced by the more robust heavy furniture of the prosperous Victorian home. Ornate decoration and dark shining woods of mahogany and rosewood veneer and elaborate machined turned legs. However no one style was dominant in the Victorian home as designers, encouraged by the fast output of the new furniture manufacturing industries gave their imaginations free run. It was now possible to mass produce styles from other historical periods and the reproduction of earlier styles from the Tudor, Elizabethan, and Neo Classical periods became popular. However the one style that perhaps recalls this period most is the Gothic revival style. Large heavy furniture pieces in Gothic design were made in solid oak to reflect Englishness. The Victorians embraced the Gothic style with enthusiasm as can be seen in architecture and art as well as in the design of these furniture pieces. The history of Victorian furniture reflects the history of the Victorian age where a society underwent huge changes yet also huge uncertainties. Which made them look forward with pride and confidence while still looking back to a fictional age of order, glory and chivalry.

A History of Victorian Furniture
Table Saw Tools

Christmas Sales DEWALT DW744X 10-Inch Job-Site Table Saw with 24-1/2-Inch Max Rip Capacity 201

Jan 12, 2012 07:29:18

Christmas DEWALT DW744X  10-Inch Job-Site Table Saw with 24-1/2-Inch Max Rip Capacity Deals
Click for larger image and other views

DEWALT DW744X  10-Inch Job-Site Table Saw with 24-1/2-Inch Max Rip Capacity

>> Click here to update Christmas prices for DEWALT DW744X 10-Inch Job-Site Table Saw with 24-1/2-Inch Max Rip Capacity <<

Christmas Sales DEWALT DW744X 10-Inch Job-Site Table Saw with 24-1/2-Inch Max Rip Capacity Feature

  • Site-Pro modular guarding system allows for tool-free adjustments of guarding components appropriate for each application
  • Exclusive telescoping fence delivers 24-1/2-inch rip capacity without sacrificing portability
  • Rack and pinion fence rails make fence adjustments fast, smooth, and accurate
  • Telescoping fence rails retract to create a small and portable package
  • Features a 15-amp, high-torque motor with the power to cut pressure-treated lumber and hardwoods


Christmas Sales DEWALT DW744X 10-Inch Job-Site Table Saw with 24-1/2-Inch Max Rip Capacity Overview

The DEWALT versatile 10-Inch Jobsite Table Saw pairs a portable design with a powerful 15 amp motor and a max rip capacity of 24-1/2 inches. Offering application-specific setups with the Site-Pro Modular Guarding System, this saw comes with a sturdy folding saw stand, a miter gauge, a push stick, and a dependable 10-inch, 24-tooth carbide blade.

callout box top
10-Inch Jobsite Table Saw
with Max-Rip Capacity
At a Glance:
  • Powerful 15 amp, high-torque motor delivers no-load speed of 3,650 rpm

  • Site-Pro Modular Guarding System allows quick, tool-free adjustments

  • Telescoping fence rails make transport easy and capacity big

  • Dust-collection port for easy clean up

  • Three-year limited warranty, one-year free service, and 90-day money-back guarantee
callout box bottom
DEWALT 10-Inch Job Site Table Saw

Featuring a dependable 15 amp motor that delivers a no-load speed of 3,650 rpm.
View larger.

DEWALT 10-Inch Job Site Table Saw

24-tooth carbide blade has max rip capacity of 24-1/2 inches. View larger.
Consistent, Powerful Performance
Thanks to a 15 amp, high-torque motor, this DEWALT table saw delivers the power you need for tough jobs like cutting hardwood and pressure-treated lumber. The saw's 10-inch blade spins at a no-load speed of 3,650 rpm for quick, clean cuts. Built-in electronic feedback helps the saw maintain consistent blade speeds, so cut quality remains consistently high--even when you're tackling the toughest applications.

To ensure accuracy and user comfort, this saw features a heavy-duty internal motor mechanism that stabilizes the arbor and keeps vibration to a minimum. In addition, the saw's soft-start feature allows for extended gear and motor life by reducing start-up torque.

Convenient Site-Pro Modular Guarding System
The DEWALT versatile Site-Pro Modular Guarding System makes it easy to set up for a variety of applications by allowing tool-free adjustment of application-specific guarding components.

The saw's exclusive fence configuration enables a huge 24-1/2-inch rip capacity. Rack and pinion fence rails make fence adjustments fast, smooth, and accurate. The fence's telescoping design allows the rails to move out to 24 inches to rip full sheets of materials or be retracted for a compact design that's easy to transport.

In addition to offering large rip capacity, this saw can cut dados up to 13/16-inch wide. It features a maximum cut depth of 3-1/8 inches at 90 degrees and 2-1/4 inches at 45 degrees. And a big 26-1/2 by 19-1/4-inch table surface provides the support you need when working with large applications.

Compact, Portable Design
This DEWALT table saw weighs just 57 pounds which, along with the folding table saw stand, makes for easy setup and tear down. You can move it from your workshop to the worksite with ease.

For added convenience, on-board storage provides easy access to the Site-Pro Guarding components and the push stick when they're not in use. A handy 2-inch dust collection port allows you to connect the saw to a Shop-Vac for efficient dust extraction and a cleaner work area.

This 10-inch jobsite table saw with 24 inch max rip capacity also comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box
DW744X DEWALT 10-Inch Job Site Table Saw, 10-inch 24-tooth carbide blades, folding table saw stand (DW7440), miter gauge, and push stick.


DEWALT 10-Inch Job Site Table Saw
Compact and portable at just 57 pounds, this table saw comes with a folding stand for convenience.





SAVE NOW on Christmas Sales Offers below!

Available In Stock.

This Christmas DEWALT DW744X 10-Inch Job-Site Table Saw with 24-1/2-Inch Max Rip Capacity is cheap and shipping as well.

Price : Click to Check Update Prices Please.

DEWALT DW744X  10-Inch Job-Site Table Saw with 24-1/2-Inch Max Rip Capacity

Limited Offer Today!! DEWALT DW744X 10-Inch Job-Site Table Saw with 24-1/2-Inch Max Rip Capacity Christmas and Cyber Monday 2011 Deals

Bose Wave Music

Southwest Airlines Operations - A Strategic Perspective

Background:

Table Saw Tools

Southwest Airlines is the largest airline measured by number of passengers carried each year within the United States. It is also known as a ‘discount airline’ compared with its large rivals in the industry. Rollin King and Herb Kelleher founded Southwest Airlines on June 18, 1971. Its first flights were from Love Field in Dallas to Houston and San Antonio, short hops with no-frills service and a simple fare structure. The airline began with one simple strategy: “If you get your passengers to their destinations when they want to get there, on time, at the lowest possible fares, and make darn sure they have a good time doing it, people will fly your airline.” This approach has been the key to Southwest’s success. Currently, Southwest serves about 60 cities (in 31 states) with 71 million total passengers carried (in 2004) and with a total operating revenue of .5 billion. Southwest is traded publicly under the symbol “LUV” on NYSE.

Table Saw Tools

Facts:

* The first major airline to fly a single type of aircraft (Boeing 737s)

* The first major airline to offer ticketless travel system wide including a frequent flier program based on number of trips and not number of miles flown.

* The first airline to offer a profit-sharing program to its Employees (instituted in 1973).

* The first major airline to develop a Web site and offer online booking. In 2001, about 40 percent (.1 billion) of its passenger revenue was generated through online bookings at [http://www.southwest.com]. Southwest's cost per booking via the Internet is about , compared to a cost per booking through travel agents of to .

Key competitive advantages:

* Low Operational costs / High Operational Efficiency

* Award winning customer service

* Human Resource practices / Work culture

Operations Analysis – Competitive Dimensions:

Southwest clearly has a distinct advantage compared to other airlines in the industry by executing an effective and efficient operations strategy that forms an important pillar of its overall corporate strategy. Given below are some competitive dimensions that will be studied in this paper.

1. Operational Costs and Efficiency

2. Customer Service

3. Employee/Labor Relations

4. Technology

1. Operational Costs and Efficiency

After all, the airline industry overall is in shambles. But, how does Southwest Airlines stay profitable? Southwest Airlines has the lowest costs and strongest balance sheet in its industry, according to its chairman Kelleher. The two biggest operating costs for any airline are – labor costs (approx 40%) followed by fuel costs (approx 18%). Some other ways that Southwest is able to keep their operational costs low is - flying point-to-point routes, choosing secondary (smaller) airports, carrying consistent aircrafts, maintaining high aircraft utilization, encouraging e-ticketing etc.

Labor Costs

The labor costs for Southwest typically accounts for about 37% of its operating costs. Perhaps the most critical element of the successful low-fare airline business model is achieving significantly higher labor productivity. According to a recent HBS Case Study, southwest airlines is the “most heavily unionized” US airline (about 81% of its employees belong to an union) and its salary rates are considered to be at or above average compared to the US airline industry. The low-fare carrier labor advantage is in much more flexible work rules that allow cross-utilization of virtually all employees (except where disallowed by licensing and safety standards). Such cross-utilization and a long-standing culture of cooperation among labor groups translate into lower unit labor costs. At Southwest in 4th quarter 2000, total labor expense per available seat mile (ASM) was more than 25% below that of United and American, and 58% less than US Airways.

Carriers like Southwest have a tremendous cost advantage over network airlines simply because their workforce generates more output per employee. In a study in 2001, the productivity of Southwest employees was over 45% higher than at American and United, despite the substantially longer flight lengths and larger average aircraft size of these network carriers. Therefore by its relentless pursuit for lowest labor costs, Southwest is able to positively impact its bottom line revenues.

Fuel Costs

Fuel costs is the second-largest expense for airlines after labor and accounts for about 18 percent of the carrier's operating costs. Airlines that want to prevent huge swings in operating expenses and bottom line profitability choose to hedge fuel prices. If airlines can control the cost of fuel, they can more accurately estimate budgets and forecast earnings. With growing competition and air travel becoming a commodity business, being competitive on price was key to any airline’s survival and success. It became hard to pass higher fuel costs on to passengers by raising ticket prices due to the highly competitive nature of the industry.

Southwest has been able to successfully implement its fuel hedging strategy to save on fuel expenses in a big way and has the largest hedging position among other carriers. In the second quarter of 2005, Southwest’s unit costs fell by 3.5% despite a 25% increase in jet fuel costs. During Fiscal year 2003, Southwest had much lower fuel expense (0.012 per ASM) compared to the other airlines with the exception of JetBlue as illustrated in exhibit 1 below. In 2005, 85 per cent of the airline’s fuel needs has been hedged at per barrel. World oil prices in August 2005 reached per barrel. In the second quarter of 2005 alone, Southwest achieved fuel savings of 6 million. The state of the industry also suggests that airlines that are hedged have a competitive advantage over the non-hedging airlines. Southwest announced in 2003 that it would add performance-enhancing Blended Winglets to its current and future fleet of Boeing 737-700’s. The visually distinctive Winglets will improve performance by extending the airplane’s range, saving fuel, lowering engine maintenance costs, and reducing takeoff noise.

Point-to-Point Service

Southwest operates its flight point-to-point service to maximize its operational efficiency and stay cost-effective. Most of its flights are short hauls averaging about 590 miles. It uses the strategy to keep its flights in the air more often and therefore achieve better capacity utilization.

Secondary Airports

Southwest flies to secondary/smaller airports in an effort to reduce travel delays and therefore provide excellent service to its customers. It has led the industry in on-time performance. Southwest has also been able to trim down its airport operations costs relatively better than its rival airlines.

Consistent aircrafts

At the heart of Southwest's success is its single aircraft strategy: Its fleet consists exclusively of Boeing 737 jets. Having common fleet significantly simplifies scheduling, operations and flight maintenance. The training costs for pilots, ground crew and mechanics are lower, because there's only a single aircraft to learn. Purchasing, provisioning, and other operations are also vastly simplified, thereby lowering costs. Consistent aircrafts also enables Southwest to utilize its pilot crew more efficiently.

E-Ticketing

The idea of ticketless travel was a major advantage to Southwest because it could lower its distribution costs. Southwest became electronic or ticketless back in the mid-1990s, and today they are about 90-95% ticketless. Customers who use credit cards are eligible for online transactions, and today Southwest.com bookings account for about 65% of total revenue. The CEO Gary Kelly thinks that this idea would grow further and that he wouldn't be surprised if e-ticketing accounted for 75% of Southwest’s revenues by end of 2005. In the past, when there was a 10% travel agency commission paid, it used to cost about a booking. But currently, Southwest is paying between 50 cents and per booking for electronic transactions that translate to huge cost savings.

2. Employee and Labor Relations

Southwest has been highly regarded for its innovative management style. It maintains a relentless focus on high-performance relationships and its people-management practices have been the key to its unparalleled success in the airline industry.

Mission Statement

To Our Employees
“We are committed to provide our Employees a stable work environment with equal opportunity for learning and personal growth. Creativity and innovation are encouraged for improving the effectiveness of Southwest Airlines. Above all, Employees will be provided the same concern, respect, and caring attitude within the organization that they are expected to share externally with every Southwest Customer.”

The Southwest mission statement shows that the company has a strong commitment to its employees. The company affords the same respect to its employees that is provided to its customers. The Southwest mission statement is unique in that it recognizes the importance of its employees within the broader business strategy, which emphasizes superb customer service and operational efficiency. The employees reciprocate the respect, loyalty and trust that Southwest demonstrates. Southwest employees are known for their loyalty, dedication, attitude and innovation. The employees are the distinguishing factor between Southwest and the rest of the airline industry.

Hiring

Southwest hiring policy is unique not only within the airline industry, but also more broadly, and revolves around finding people with the right attitude that will thrive in the Southwest culture. Extensive procedures are employed to hire for positive attitude and dedication. Those who do not posses those qualities are weeded out. Colleen Barrett, a non-operational officer at Southwest, states that

“Hiring is critical, because you cannot institutionalize behavior. Instead, you must identify those people who already practice the behaviors you are looking for. Then you can allow Employees to be themselves and make decisions about Customer service based on common sense and their natural inclinations.” 1

Recruiting and interviewing at Southwest is a two-step process. The first step is a group interview, conducted by employees, where communication skills of potential candidates are evaluated. The next steps in this process are one on one interview, where the candidates' attitudes and orientation toward serving others are evaluated. These hiring criteria apply to all job functions since all Employees at Southwest play a customer service role. A critical part of Southwest operational strategy is that every job at Southwest is a customer service position, whether it directly applies to the customer or whether it is internal.

The table below shows that even though Southwest is the most heavily unionized airline, at approximately 80%, that contract negotiations between the unions and Southwest are much shorter in duration than of the other major carriers. This shows the quality of relationship that Southwest has with its employees and with the unions that represent them.

Culture

Southwest was created as a different kind of company and from its beginnings a unique culture was nurtured. In 1990 Colleen Barrett formed the Southwest Culture Committee. This is unique within the industry and among all large companies. The committee also has a mission statement:

“This group's goal is to help create the Southwest spirit and culture where needed; to enrich it and make it better where it already exists; and to liven it up in places where it might be "floundering". In short, this group's goal is to do "whatever it takes" to create, enhance, and enrich the special Southwest spirit and culture that has made this such a wonderful Company/Family.”

It is this unique approach to company values that has created a culture that differentiates itself from others. Southwest’s culture is the reason why it is successful.

3. Customer Service

The Mission of Southwest Airlines
The mission of Southwest Airlines is dedication to the highest quality of Customer Service delivered with a sense of warmth, friendliness, individual pride, and Company Spirit.

Approach

Herb Kelleher, founder of Southwest, has been quoted as saying that "We're in the Customer service business; we just happen to provide airline transportation".2 Award winning customer service is a distinguishing characteristic of Southwest and it is referred to internally as “Positively Outrageous Service”. It means that from the top to bottom everyone does whatever he or she can to satisfy the customer. This includes Herb Kelleher, who has been known for helping out baggage handlers on Thanksgiving. It is through emphasizing the customer and employee that Southwest is able to differentiate itself from others in the airline industry. On a more technical level, each employee or group within Southwest has his or her own customer. This means that every employee ‘serves’ in one way or another despite not being directly involved with the passenger. The mechanic’s customer is the pilot and the caterer’s is the flight attendant.

Results

It can be said that the "Positively Outrageous Service" that is unique to Southwest “is not the result of a department, or a program, or a mandate from management. It is not secondary to the product; it is the product.” This approach creates the conditions where Employees are more likely to treat customers in ways that distinguish the company from others. There are numerous accounts of passengers who have received exceptional treatment from Southwest employees.

The question that needs to be answered is how Southwest’s customer service is different and why? Is it common for customers of other airlines to rave about their special service? The answer is that it is not. While Southwest does not have a monopoly on people who are kind and who are willing to go above and beyond to satisfy a customer, such behavior is nurtured at Southwest to a much greater extent.

It can then be concluded that the customer service that is inherent to Southwest is a part of its culture. This culture is supported through employee encouragement to do the extra to satisfy the customer. This approach inspires people who would ordinarily only on occasion go out of their way to help someone, to become consistent performers that offer exceptional service all the time. Southwest employees are what differentiate its customer service from the other airlines.

4. Technology

Southwest utilizes technology in many ways to fulfill its business objectives and maintain its efficient operations. According to its CEO, technology equals productivity. Launched in 1996, ticketless travel was first introduced by Southwest. On May 1st 2000, Southwest Airlines introduces "SWABIZ," a portal that assists company travel managers in booking and tracking trips made through its web site [http://www.southwest.com]. There are many new technology initiatives being undertaken currently and some are in the pipeline.

Bar codes in Boarding Passes

Southwest Airlines has invested million during the past three years to standardize corporate and terminal operations on about 10,000 Dell OptiPlex desktop and Latitude notebook computers according to its company executives. Southwest wanted to replace its well known, brightly colored plastic boarding passes with an electronic system with bar-code paper boarding passes. So it installed about 350 touch screen ticket readers powered by Dell OptiPlex desktops. The bar code gives Southwest more information to automatically reconcile the number of boarding passes with the number of passengers that actually board the plane.

Although the technology will help Southwest Airlines remain efficient by consolidating passenger information for the company's 3,000 daily flights, there were concerns it could lengthen the time to get travelers on board. However it was found that scanning each bar code on the boarding passes didn't increase or shorten boarding schedules, but it did take minutes from administrative processes, such as looking up customer records. The new paper bar code system is giving Southwest ticket agents the ability to match a customer record within having to scroll through and log into multiple software screens. The process is much more automated. Once the bar code on the boarding pass is scanned at the terminal gate it checks off the person from the passenger list in real time.

The old process was manual that involved finding the information, scrolling through several software screens from reservations to check-in to boarding. The bar code hardware to scan the boarding passes has been deployed. The company is in the process of replacing customer service back-office equipment at airports including at its headquarters in Dallas.

Software Upgrades

Software applications, such as those used by clerks to check in passengers, are being replaced. Southwest Airlines' internally written "Airport Application Suite" is expected to rollout next year as the company transitions from green screens to Window-based user interface. Similar to Wal-Mart Stores Inc., Southwest Airlines believes in developing in-house the software that runs its operations. The company uses very little off-the-shelf software. There are between 75 and 100 projects in the works each year supported by approximately 900 IT employees.

RFID

Radio frequency identification technology, a favorable alternative to bar-coding for luggage identification, is also on Southwest's radar. It plans to test RFID technology sometime in 2006. Even though, Southwest is playing a little catch-up with other airlines such as Air Tran, Alaska and Champion Airlines, in many cases they are able leapfrog to more sophisticated applications easily having waited longer.

Challenges:

Southwest has emerged very successful, despite the most troubled times in the airline market. However, it faces new challenges in the face of increasing competition from other low fare airlines such as JetBlue, ATA airlines, America West.

Reserved Seating

Due to increasing security guidelines since September 2001, Southwest would need to prepare for assigned (reserved) seating to track its in-flight passengers. This change will involve large technology investments and may impact its gate operations negatively since the current way of unassigned seating has helped in quick gate turnarounds.

Passenger Demand

The keep-it-simple philosophy has served Southwest well. But as its own business grows and grows more complex, with plans to purchase dozens of new aircraft and an expected upsurge in passenger traffic to about 80 million boarding’s a year, the simplicity strategy that has been reflected in the airline's IT philosophy is evolving. The CIO Tom Nealon says that "It's time to adapt our business processes for efficiency. As our airline scales for us to provide the same kind of high-touch customer service, we have to automate a lot of things we've been able to do without technology previously. The challenge is doing that without conceding the customer touch." Southwest is also aggressively pursuing customer relationship management (CRM) techniques and has applications to get insight into customer’s wants and dislikes. According to an interview with its CEO Gary Keller, Southwest has its focus on improving in two areas - customer’s airport experience and in-flight experience.

In-Flight Entertainment

In an overall effort to improve customer’s in-flight experience, in-flight entertainment is something that Southwest is currently evaluating and which JetBlue has been very successful at already because of its introduction in its long-haul flights. In comparison, Southwest has 415 airplanes to consider and that represents an investment decision at a whole new dimension. Additionally, Southwest has to consider how things may fit into their environment. At this point, 60% of its service is still very short haul. Southwest needs to be mindful of the fact that a certain approach that has been successful for its competitor may not be necessarily work to its advantage.

Summary:

Southwest has long been regarded as a benchmark in its industry for operational excellence. Southwest Airlines is a fine example of a company that is committed to its core competencies - efficient operations to drive its low cost structure, outstanding delivery of customer service and innovative HR management practices. We hope this paper provided a good insight into Southwest operations, as part of its overall strategy, to achieve success and gain competitive advantage.

References:

1. [http://www.southwest.com] (Southwest airlines official web site)

2. “Southwest keeps it simple” - Air Transport World, April 2005, Pg 36

3. “Around the World on (or So): How High Can Discount Airlines Fly?“ Strategy Management - Knowledge@ Wharton Newsletter Oct 5, 2005

4. TechWeb - [http://www.techweb.com/wire/ebiz/173601227]

5. “Southwest's Strategy for Success: Consolidate!” - Oracle Magazine (Sept/Oct 2004 edition) http://www.oracle.com/technology/oramag/oracle/04-sep/o54swest.html

6. “Southwest Airlines: High Tech, Low Costs” - Eweek.com, April 2005

7. “Jet Fuel Hedging Strategies: Options Available for Airlines and a Survey of Industry Practices” – Kellogg School of Management Research Paper, Spring 2004

8. Winning Behavior: What the Smartest, Most Successful Companies Do Differently, Terry R. Bacon and David G. Pugh, 2003

9. Time Magazine, Oct 28th 2002 issue, Vol. 160 Issue 18, p. 45

10. “Wings Of Change”,Information Week, March 28, 2005,

11. Labor Contract Negotiations in the Airline Industry, Monthly Labor Review, July 2003, page 24

Southwest Airlines Operations - A Strategic Perspective
Table Saw Tools

Christmas Sales DEWALT DW7450 Table Saw Stand for DW745 10-Inch Compact Job Site Table Saw 201

Jan 11, 2012 08:05:01

Christmas DEWALT DW7450  Table Saw Stand for DW745 10-Inch Compact Job Site Table Saw Deals
Click for larger image and other views

DEWALT DW7450  Table Saw Stand for DW745 10-Inch Compact Job Site Table Saw

>> Click here to update Christmas prices for DEWALT DW7450 Table Saw Stand for DW745 10-Inch Compact Job Site Table Saw <<

Christmas Sales DEWALT DW7450 Table Saw Stand for DW745 10-Inch Compact Job Site Table Saw Feature

  • Heavy-duty tube steel construction provides the strength you need for safe operation
  • Support bar hardware holes for secure fastening of saw to the stand
  • Designed for use with the DW745 Compact Job Site table saw
  • Lightweight; folds flat for easy handling, storage, and transport
  • Backed by a 3-year limited warranty


Christmas Sales DEWALT DW7450 Table Saw Stand for DW745 10-Inch Compact Job Site Table Saw Overview

The DeWalt DW7450 table saw stand delivers the best of both worlds: solid construction for a safe work environment and a compact, folding design for easy transport and storage. Featuring heavy-duty tube steel construction that can support the stress of tough saw jobs, this stand is designed for use with the DeWalt DW745 10-inch compact job site table saw. Integrated support bar hardware holes make it easy to secure the saw to the stand for confident operation.



SAVE NOW on Christmas Sales Offers below!

Available In Stock.

This Christmas DEWALT DW7450 Table Saw Stand for DW745 10-Inch Compact Job Site Table Saw is cheap and shipping as well.

Price : Click to Check Update Prices Please.

DEWALT DW7450  Table Saw Stand for DW745 10-Inch Compact Job Site Table Saw

Limited Offer Today!! DEWALT DW7450 Table Saw Stand for DW745 10-Inch Compact Job Site Table Saw Christmas and Cyber Monday 2011 Deals

Touch Sceen Monitor 3D Projector