For your first table saw, you may have a hard time choosing the correct kind to invest in. This is because there are wide varieties of saws in this category you can choose from. However, if you conduct a little research you will have no problem. Here are some tips that will guide you in choosing a proper saw and table saw fence.
Table Saw Fence: This is the sliding part of the saw. It is used when you are feeding wood on the saw. The quality which your table saw fence will give you will determine the cost of the saw. The cost is directly proportional to the quality of wood resulting from the fence. For most of the contractor saws, they use an average fence. Beginners should also consider using average fence since it is easy to use and also gives high quality results. However, after market fences can be of higher quality and provide better results.
Table Saw Tools
Tilt: The tilt is a feature included in these units. Its main importance is to help with precision cutting. In the past, cutting units only had a right tilt, but at the moment, you can find some that feature left tilt. The left tilts were only available to few professional cabinet models. Nonetheless, many people prefer using the right tilt versions since they have more accessories than the left tilt varieties.
Miter Gauge: This is an accessory fitted on the cast iron table top. The main purpose of the miter gauge is to guide the wood when you are cutting it. The quality of the miter gauge that comes with the saw is of average quality. You can buy a new one from a local outlet which is of higher quality.
Power: The size of the saw determines the power. Bigger saws are fitted with bigger motors that have ability of producing greater horsepower. For professional work, 3-5 Horsepower will be suitable. An average of 2 horsepower is normally suitably for home use.
Table Saw Blade: There are different kinds of saw blades available in the market. These blades vary in shape, material of make and size. The material used to make the blade is the most important factor. A variety of blades called combination blades is the most commonly used.
Of note: the table saw fence is generally the weak link in a new saw system. As noted above, a good recommendation when buying a used saw is to invest in a new table saw fence.
Click for larger image and other views
DEWALT DW745 10-Inch Compact Job-Site Table Saw with 16-Inch Max Rip Capacity Feature
- 15 Amp motor quickly rips through hardwoods with ease
- Rack and pinion fence rails make fence adjustments fast, smooth and accurate
- Telescoping fence rails retract to create a small, portable package
- 16-inch of rip easily cuts a variety of larger shelving and trim materials
- Metal roll cage base offers greater durability than plastic bases; Blade can be adjusted 0 - 45 degrees for bevel applications
DEWALT DW745 10-Inch Compact Job-Site Table Saw with 16-Inch Max Rip Capacity Overview
The DEWALT versatile 10-Inch Jobsite Table Saw features the Site-Pro Modular Guarding System for application-specific setups that result in quick, accurate cuts. It pairs a portable design with a powerful 15 amp motor and large16-inch rip capacity. This saw comes with blade guards, a miter gauge, a push stick, and a dependable 10-inch, 24-tooth carbide blade to get your project started right away.
|
 This saw features a dependable 15 amp motor that delivers a no-load speed of 3,850 rpm. View larger. |
 Weighing just 45 pounds, the table saw comes with a folding stand for easy setup and tear down. View larger. |
Thanks to a 15 amp, high-torque motor, this DEWALT table saw delivers the power you need for tough jobs like cutting hardwood and pressure-treated lumber. The saw's 10-inch blade spins at a no-load speed of 3,850 rpm for quick, clean cuts--no matter what the application.
Convenient Site-Pro Modular Guarding System
The DEWALT versatile Site-Pro Modular Guarding System makes it easy to set up for a variety of applications by allowing tool-free adjustment of application-specific guarding components.
The saw's exclusive fence configuration enables a huge 16-inch rip capacity. Rack and pinion fence rails make fence adjustments fast, smooth, and accurate. The fence's telescoping design allows the rails to move out to 16 inches to rip full sheets of materials or be retracted for a compact design that's easy to transport.
In addition to offering large rip capacity, this saw features a maximum cut depth of 3-1/8 inches at 90 degrees and 2-1/4 inches at 45 degrees. Its table surface is coated to reduce friction for improved cut quality across the board, while a metal roll cage base provides a sturdy setup and improved durability when compared with plastic bases.
Portable Design for Use Anywhere
This DEWALT table saw weighs just 45 pounds which, along with the folding table saw stand makes for easy setup and tear down. You can move it from your workshop to the worksite with ease.
For added convenience, on-board storage provides easy access to the Site-Pro Guarding components and the push stick when they're not in use. A handy 2-1/2-inch dust collection port allows you to connect the saw to a Shop-Vac for efficient dust extraction and a cleaner work area.
This 10-inch jobsite table saw with Site-Pro Modular Guarding System also comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.
What's in the Box
DW745 DEWALT 10-Inch Job Site Table Saw, 10-inch 24-tooth carbide blades, miter gauge, push stick, blade guard.
 Quick, tool-freeadjustments |  Housing fits snuglyaround stand base |  Lock mechanism fits ontop of table stand |  Modular guard system protects hands and fingers |
Available In Stock. |
| This item ships for FREE with Super Saver Shipping. |
Price : Click to Check Update Prices Please. |
